Site icon Your Absolute Guide to Basic Power Tools

ROUTER POWER TOOL An Incredibly Easy Method That Works For All



Why do you need a router power tool? Knowing how to make the most of this portable tool is vital to enhancing your projects. Let’s show you how to find the right router power tool for your specific product(Service).

The router is one of the most helpful power tools available. Routers are power tools that you may use to improve the aesthetics of a finished product.

It’s an effective power tool for enhancing the design of any project. And because of this, understanding how to get the most out of a router is crucial.

Professional woodworkers view it as a first-choice tool for many of the procedures necessary for classic wood joints. In addition, it may often determine whether a project is amateurish or professional.

The portable router is related to the stationary shaper if you associate the saber saw with a jigsaw or bandsaw, a portable drill with a drill press, a cutoff saw with a table saw, or a radial arm saw.

Portable Router Tools

You can use routers on wood, fiberglass, or plastic. Engrave, curve, groove, or form inlets with a router. Too often, however, the operator limits the router and shaper (or spindle molder) to producing decorative edges on furniture components, which is analogous to only using a saw for crosscutting.

A router’s cutting action comes from the sidewalls rather than the tip. Therefore, go with the grain for the most outstanding results when using the router.

Routers don’t require expertise to use, but they do produce expert results. For example, the router is used to make spline joints, mortise and tenon connections, and the mating shapes needed for a drop-leaf table, with incredible ease and speed, using the proper cutters.

Brushless DEWALT 20V Max XR Cordless Router, Tool Only (DCW600B)

The size of this router is ideal. It’s simpler to operate; take it out of the box, plug in a battery, change the bit, and cut some wood. It’s that easy.

This router will be ideal for minor to major work. For small cuts, it’s easy to use and has a lot of power. With a third of a 2 Ah battery for reducing three pulls and rounding all corners, battery life is outstanding.

It doesn’t create a lot of noise, feels good in the hand, has an on/off power switch that isn’t accidentally pushed, and there’s no cable attached.

Design and Specification

The depth adjustment ring on the DEWALT 20V Max XR Cordless Router enables quick and easy height adjustments.

After the unit is turned off, the electronic brake slows the motor down faster; speed ranges from 16,000 to 25,500 RPM.

The user can tailor the router’s speed to the application using a variable speed dial. In addition, the motor can retain speed during cuts thanks to a soft start motor with full-time electrical feedback.


Over 3,560 customer reviews gave this DCW600B router a 5 out of 5-star rating, in line with the average rating for all evaluated goods.

It’s unusual for a tool to achieve a five-out-of-five user rating. However, because this tool has accomplished this, it is commonly regarded as an effective router that improves performance.

Which batteries are compatible with this device? The DEWALT 20V battery line is consistent with the DCW600B router. However, you cannot use it with any other brand. Although you can use a flex volt battery with this tool, it is not recommended.

Router Bit Size

1/4″ bits are the recommended bit size for the DCW600B router. It also supports 3/8. They work and fit perfectly. However, not 1/2 or anything more significant. With this router, you can only use those bits. This router’s comparable HP is 1.25HP.


The router may be operated freehand with most accessories, jigs, and templates that you purchase.

A router is a simple tool that consists of a motor with a cutter-gripping device on one end and a base that holds the motor erect while allowing vertical adjustment to control depth-of-cut.

It can’t do anything but whirl by itself, like a portable drill. If you have various router bits, jigs, and accessories on-hand, the tool will be one of the most frequently used in your workshop.

Compact Router Makita RT0701C 1-1/4 HP

The Makita RT0701C cordless router is the next on our list of recommendations.

Design and Specification

The user can tailor the speed to the application using the variable speed control dial (10,000 to 30,000 RPM).

For more exact settings, a smooth rack and pinion fine depth adjustment system is used. For greater comfort and control, the body is slim and ergonomically built.

Easy depth changes and base removal/installation thanks to the quick release cam lock system. Under load, electronic speed control keeps the speed constant. For a smooth start-up, use the soft start feature.


This Makita RT0701C 1-1/4 HP Compact Router received a 5 out of 5-star rating from 4,077 customers, in line with the average rating for all assessed goods. You’ll be hard-pressed to locate a power tool that has been thoroughly reviewed. But not this router; it comes highly recommended.

If you require medium power, versatility and only want to use one router, this is a fantastic option. It’s well-made, the machining is precise, and the adjustments are clear and straightforward.

The motor never became overheated when cutting complete 1-inch quarter-round profiles in a single pass, or the router slowed down. Dust collection is adequate. As one would expect, chips are flying everywhere. However, the cutting is visible. This Makita router is highly recommended.

Router Bit Size

What drill bit set should I get for this tool? Use a 1/4″ router with a collet. Get a 1/2″ if you wish to use a 3/8″ or 1/2″ router.

The 1/4″ router is the most commonly used since it can be used in one hand for quick work and does not wear your arm out as quickly as a larger router.

This one is useful for hinge guides and door installations, laminate trimming (with bearings), and rounding over the edges of boards or plywood.

Get 1/2″ and 3/4″ diameter cove bits to make 1/4″ and 3/8″ thick edges with no slivers from the bends on the edges.


Use less depth if you want a less pronounced curve; the curve is not symmetrical. Buying the 1/4″ router with a vacuum dust collecting system makes perfect sense.

Shelf dados, which are typically 1/2″ to 3/4″ wide, are best done with a more powerful 1/2″ router, but two passes overlapping with a 1/2″ router would suffice with a 1/2″ straight bit. Always utilize dust collection when plunging.

Get 1/8 or 1/4 inch round bits for freehand scrollwork. Also, get a 1/4″ router if you don’t already have one or have a particular shop need.

When routing around the edge of a board, there is a proper way to do it. Going the right track with plywood, pine, fir, spruce, and other woods can pull off long splinters.

You can avoid this by making a shallow pass in the ‘wrong’ direction to knock off the edge, going regular depth in the correct order.

Types, Sizes, and Speeds of Portable Router Tools

There are numerous sizes of routers available, each with differing levels of power and speeds. Some people like to detail glass and ceramic items with a router and a diamond wheel attachment. At first, routers can prove hard to use, but don’t give up. In no time, you’ll be good at it.

While the portable router’s core function is relatively common, manufacturers have their views about how the device should work, where the on/off switch should be positioned, and how the handles should be constructed.

In many cases, a single inventory will have a range of shapes. As a result, there are nearly as many options as there are automotive designs.

The two router brands showed above only scratch the story’s surface, but they demonstrate varied tool profiles.

All of the units have a two-handed grip. It could be a set of matching knobs, a pair of upright handles, or a knob and pistol grip combo. The switch is located on the top of some motors, while others are integrated into one handle.

Split-collet chucks are used in routers, and they tighten around the shank of a bit when a threaded lock nut is cranked. It is usually done with two wrenches, one on the motor shaft and the other on the lock nut.

Some devices include a built-in motor shaft locking mechanism, which can save time by allowing you to tighten the collet with just one tool.

Safety Considerations for Portable Routers

If you move the router too slowly, you risk burning the area you’re working on. It can also make your bit seem unresponsive. On the other hand, moving the router too quickly is risky because your work will be sloppy, and your bit will most likely break.

It will take some practice to understand the proper pressure and pace to utilize your router. However, if you listen closely to the router, you’ll notice that it makes a distinctive sound when it’s working correctly.

With a router, a creative person can create some incredible things! The more you understand how your particular router works, the more valuable it will become.

Routers come with or without a power cord. Choose a router with a lot of horsepowers if you want to achieve great results. It will be more adaptable and assist you in completing your tasks correctly.

Router Collet: A User’s Guide

The steel sleeve that keeps a router bit in place is known as a collet. 

A router power tool has a flat base and a rotating blade extending past the bottom. It has a spindle that may be driven by an electric motor or by a pneumatic motor. It can rout an area in a hard material like wood or plastic.

The base, motor, and collet are the three main pieces of any router power tool, regardless of the brand or size you buy for your project. The motor is housed within the base itself. The collet is what keeps the router bit in place.

There are a variety of bases from which to pick. A permanent base features a round bottom plate, side handles, and a height that you may adjust. Some variants come with side-mounted accessories.

Routers, especially light-duty ones, may be built with just one collet, such as one that grips 1/4″ shank bits. More tough routers may accept a 3/8″ or even 1/2″ collet or be engineered to accommodate collets of various diameters.

It’s only natural to suppose that as the collet size grows, so does the tool’s horsepower. A one-collet router, in general, only accepts one shank size.

A router with interchangeable collets is more versatile. Not only because it will likely have more horsepower and be able to complete more work faster, but also because it can hold a more significant number of cutters, including some that are specialized production units.

Plunge Routers

Plunge routers have a few advantages over traditional routers. For one thing, you can begin interior cuts, such as those required for halted dadoes, mortises, and various sorts of carving, while the router is securely seated on the object.

You can then lower the bit to a depth you can read off on a scale or a depth you’ve already set using a tool control. The router must be held at an angle and then slowly tilted downward until the bit has penetrated and the router’s base is firmly settled if it does not have the plunge capability.

It works, but it’s inconvenient and a little more challenging to start the cut correctly. You can do plunge cutting with regular straight-shank bits, but when you need to go all the way through the job, you’ll need to use a plunge-cutting bit with a cutting point that acts as a drill bit.

There Are a Few Things to Think About When It Comes to Power Routers:

Routers come with more accessories than any other power tool. There are almost a thousand bits to select from. A router table is a frequent addition. They come in handy for routing tiny parts because they hold them in position for you.

The router is turned on and off using a trigger on the D-shaped handle base. It is pretty practical. The basis you select is a matter of personal preference.

Both methods are effective. However, if you expect to use the router a lot, consider buying kits that include both bases so you can easily swap them.

Make sure you have earplugs on hand because routers can be rather loud. Also, depending on the material you’re dealing with, it could generate a massive amount of dust in the air.

If you’re routing wood, wearing a respirator is a good idea. When using a router, always wear eye protection. Remember that the router’s tip may be hot after you’ve finished using it. Know your router power tool and use it safely.

Conclusions on the Portable Cordless Router

When compared to a corded router, the cordless version is far superior. In addition, because the Makita cordless has a smaller diameter where you hold it, it’s more elegant and suitable for small hands.

I believe you will be pleased with this purchase if your budget allows it. If you’re going cordless, batteries are an expensive investment, so you might as well acquire all of your cordless tools from the same manufacturer.

As a result, unless you have a lot of money to burn, the router may not be as crucial as you think when making your purchasing decision or maybe not.

Exit mobile version